Hp Thinstate Capture - HP 2533t - Compaq Mobile Thin Client Administrator's Reference Manual

HP ThinState Capture

The HP ThinState Capture tool is a wizard-based utility that you can use to capture an HP XP Embedded
image, which you can then deploy to another HP computer of identical model and hardware.
NOTE: HP ThinState Capture is not a standalone utility and can only be accessed by the administrator
from within the computer image.
Save all data on the USB flash drive prior to performing this procedure.
1. Select Start > Control Panel > HP ThinState Capture.
2. Click Next.
Attach a disk-on-key (DOK) to the computer. The DOK drive letter and size are displayed.
The DOK must be greater in size than the onboard flash drive. Therefore, if your computer has a
512-MB flash drive, the USB flash drive must be 1 GB.
3. Click Capture.
4. Click Yes. The HP ThinState Capture utility formats and makes the USB flash drive bootable. HP
ThinState Capture will now reboot the system.
5. Follow the on-screen instructions.
You can now use the USB flash drive to deploy the captured image to another HP computer of the
exact same model and hardware with equal or greater flash drive capacity.
24 Chapter 4 Applications