Mds-Specific Ficon Advantages; Fabric Optimization With Vsans - Cisco AP776A - Nexus Converged Network Switch 5020 Configuration Manual

Chapter 29 Configuring FICON
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

MDS-Specific FICON Advantages

This section explains the additional FICON advantages in Cisco MDS switches and includes the
following topics:
•
•
•
•
•

Fabric Optimization with VSANs

Generally, separate physical fabrics have a high level of switch management and have a higher
implementation cost. Further, the ports in each island may be over-provisioned depending on the fabric
configuration.
By using the Cisco MDS-specific VSAN technology, you can introduce greater efficiency between these
physical fabrics by lowering the cost of over-provisioning and reducing the number of switches to be
managed. VSANs also help you to move unused ports nondisruptively and provide a common redundant
physical infrastructure (see
Figure 29-2
SAN island for
department no.1
SAN island for
department no. 2
SAN island for
department no. 3
OL-18084-01, Cisco MDS NX-OS Release 4.x
Fabric Optimization with VSANs, page 29-3
FCIP Support, page 29-4
PortChannel Support, page 29-4
VSANs for FICON and FCP Mixing, page 29-5
Cisco MDS-Supported FICON Features, page 29-5
Figure
VSAN-Specific Fabric Optimization
Separate physical fabrics
Application
servers
29-2).
Disk
arrays
Department no. 1
Department no. 2
VSAN
Cisco MDS 9000 Family CLI Configuration Guide
About FICON
Collapsed fabric with
VSANs
Common
storage pool
found among
VSANs
Department no.3
VSAN
29-3