Cisco AP776A - Nexus Converged Network Switch 5020 Configuration Manual page 1298

Destination Profiles
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Command
Step 3
switch(config-callhome)#
destination-profile
full-txt-destination e-mail-addr
person@place.com
switch(config-callhome)#
destination-profile
full-txt-destination message-size
1000000
Step 4
switch(config-callhome)#
destination-profile
short-txt-destination e-mail-addr
person@place.com
switch(config-callhome)#
destination-profile
short-txt-destination message-size
100000
Step 5
switch(config-callhome)#
destination-profile XML-destination
e-mail-addr findout@.cisco.com
switch(config-callhome)#
destination-profile XML-destination
message-size 100000
Note Steps 3, 4, and 5 in this procedure can be skipped or configured in any order.
To configure a new destination-profile (and related parameters), follow these steps:
Command
Step 1
switch# config t
Step 2
switch(config)# callhome
switch(config-callhome)#
Step 3
switch(config-callhome)# destination-profile
test
Cisco MDS 9000 Family CLI Configuration Guide
53-8
Purpose
Configures an e-mail address for the predefined
full-txt-destination profile. The e-mail addresses in this
destination profile receives messages in full-txt format. The
full-text format provides the complete, detailed explanation
of the failure.
Use a standard e-mail address that does not have any
Tip
text size restrictions.
Configures a maximum destination message size for the
predefined full-txt-destination profile. The valid range is 0
to 1,000,000 bytes and the default is 500,000. A value of 0
implies that a message of any size can be sent.
Configures an e-mail address for the predefined
short-txt-destination profile. The e-mail addresses in this
destination profile receive messages in short-txt format.
This format provides the basic explanation of the failure in
the Call Home message.
Use a pager-related e-mail address for this option.
Tip
Configures maximum destination message size for the
predefined short-txt-destination profile. The valid range is 0
to 1,000,000 bytes and the default is 4000. A value of 0
implies that a message of any size can be sent.
Configures an e-mail address for the predefined
XML-destination profile. The e-mail addresses in this
destination-profile receives messages in XML format. This
format provides information that is compatible with Cisco
Systems TAC support.
Do not add a pager-related e-mail address to this
Tip
destination profile because of the large message
size.
Configures maximum destination message size for the
predefined destination profile
range is 0 to 1,000,000 bytes and the default is 500,000. A
value of 0 implies that a message of any size can be sent.
Purpose
Enters configuration mode.
Enters the Call Home configuration submode.
Configures a new destination profile called test.
OL-18084-01, Cisco MDS NX-OS Release 4.x
Chapter 53 Configuring Call Home
. The valid
XML-destination