HP AK241A - StorageWorks 8Gb Simple SAN Connection Installation And Reference Manual page 25

• QuickTools web applet (EmbeddedGUI): Provides for access to the QuickTools web applet. QuickTools
enables you to point at a switch with an internet browser and manage the switch through the browser.
The default is enabled.
• Simple Network Management Protocol (SNMP): Provides for the management of the switch through
third-party applications that use the Simple Network Management Protocol (SNMP). Security consists
of a read community string and a write community string that serve as passwords that control read and
write access to the switch. These strings are set at the factory to these well-known defaults and should
be changed if SNMP is to be enabled. Otherwise, you risk unwanted access to the switch. The switch
supports SNMP versions 1, 2, and 3. The default configuration enables SNMP and disables SNMP
version 3 security.
• Common Information Model (CIM): Provides for the management of the switch through third-party
applications that use the Storage Management Initiative–Specification (SMI-S). The default is enabled.
• File Transfer Protocol (FTP): Provides for transferring files rapidly between the workstation and the switch
using FTP. The default is enabled.
• Management Server (MS): Enables or disables the management of the switch through third-party
applications that use FC-GS-3 Management Server. The default is disabled.
• Call Home:
IMPORTANT: The Call Home service provides an e-mail notification capability for the switch. This
service has no relationship with the HP Call Home feature, which notifies only HP services.
Provides for automated e-mail notification of switch status and operating conditions based on specified
event severity levels. The default is enabled. The Call Home service requires an Ethernet connection to
at least one Simple Mail Transfer Protocol (SMTP) server. You must configure the Call Home service to
do the following:
• Enable primary and secondary SMTP servers and specify their IP addresses
• Specify contact information
Configure one or more Call Home profiles to specify e-mail recipients, message format, and the event
severity level that will initiate a message. In addition, you can configure periodic event data collection
and processing through the Tech_Support_Center profile for automated status and trend analysis.
8/20q Fibre Channel Switch Installation and Reference Guide 25