Modifying An Snmp Version 3 User Account - HP AK241A - StorageWorks 8Gb Simple SAN Connection Cli Manual

Modifying an SNMP version 3 user account

To modify an SNMP version 3 user account, enter the snmpv3user edit command as shown in the
following example:
8/20q FC Switch #> admin start
8/20q FC Switch (admin) #> snmpv3user edit
A list of SNMPV3 user attributes with formatting and current attribute
values for the specified SNMPV3 user will follow.
Enter a new value OR simply press the ENTER key where-ever allowed to
accept the current value.
If you wish to terminate this process before reaching the end of the list,
press "q" or "Q" and the ENTER OR "Ctrl-C" key to do so.
Username
Group
Authentication
Do you want to save and activate this setup ?
SNMPV3 user account edited and activated.
(8-32 chars)
(0=ReadOnly, 1=ReadWrite) [ReadWrite ] : 1
(True/False)
8/20q Fibre Channel Switch command line interface guide 127
: snmpuser1
[True ] : f
(y/n): [n] y