Open Caveats - Cisco AJ732A - MDS 9134 Fabric Switch Release Note

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
•
•
•

Open Caveats

•
•
•
OL-14116-01
Workaround: This issue is resolved.
CSCsh68830
Symptom: The Java Help search engine in Cisco Fabric Manager and Device Manager does not
work correctly in Cisco SAN-OS 3.1(2).
Workaround: This issue is resolved.
CSCeh35635
Symptom: For passwords authenticated by an AAA server, the MDS switch should inform the user
when their password is about to expire.
Workaround: This is an enhancement. It is available only for CLI logins. Fabric Manager and
Device currently do not support this feature.
CSCsh74881
Symptom: If the port license count on an MDS switch is greater than the one supported by the
installed platform, ports do not automatically acquire a license. The license must be acquired
manually.
Workaround: This issue is resolved.
CSCsg49151
Symptom: If you bring up more than one link at a time between two VSANs that have overlapping
domains and at least one of the switches is SDV enabled, one link will become isolated. The other
links will come up, even though the domains are overlapping. In addition, the SDV virtual domains
will change, causing traffic disruption on all devices associated with their old value.
Workaround: Bring up multiple links between two switches one at a time. Verify that the first link
came up correctly before attempting to bring up the next link. If the first link fails to come up
because of a domain ID overlap, resolve the domain conflict and then try again to bring up the links.
CSCsh31236
Symptom: On a Cisco MDS 9513 Switch, when there are more than 512 ports on a single chassis,
some ports with indexes between 0x200 and 0x20f may not come up. In addition, some ports with
indexes between 0x0 and 0xf may show unexpected behavior when the ports with indexes between
0x200 and 0x20f are brought up. To display the port indexes, issue the show system internal fcfwd
idxmap port-to-interface command. The port indexes appear in the column with the heading "glob
idx."
Workaround: Do not bring up more than 512 ports. To ensure that the port indexes between 0x0
and 0xf behave correctly, follow these steps:
Issue the shut command for ports with indexes 0x200 to 0x20f.
1.
Issue the shut command for the ports with indexes 0x0 to 0xf, followed by the no shut
2.
command for the same port indexes.
CSCsi72048
Symptom: FCIP links may fail on an MDS 9216i switch that has compression set to auto when the
other end of the FCIP link is terminated by an IPS-8 module. You may see the following message in
the logs:
Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.2(1)
Caveats
37