Important Notes; Open Caveats - Cisco Catalyst Express 520-24LC Release Note

Important Notes

•
Important Notes
When you start the device manager in secured mode from Internet Explorer 6.0 or from FireFox1.5,
several security certificates appear. Accept all of the certificates. The device manager then appears.
For a complete list of supported browsers and operating systems, see the User Guide for the Catalyst
Express 520 Switches.

Open Caveats

This section describes the open caveats with possible unexpected activity in this software release. Unless
otherwise noted, these severity 3 Cisco IOS configuration caveats apply to all of the Catalyst Express
switches:
•
•
•
Release Notes for the Catalyst Express 520 Switches, Cisco IOS Release 12.2(37)EX and Later
4
CSCsj52489
When you start the device manager from a Firefox browser session, an invalid certificate error
appears.
The workaround is to delete the certificate(s) in Firefox and then close and restart the browser.
Follow these steps to delete the certificate(s):
– In Firefox version 1.5, select Tools > Options > Advanced > Security > View Certificates >
Web Sites. Select the certificate(s), and click Delete to delete the certificate(s).
In Firefox version 2.0, select Tools > Options > Advanced > Encryption > View
–
Certificates > Web Sites. Select the certificate(s), and click Delete to delete the certificate(s).
When you start the device manager from Internet Explorer 7.0, a certificate error page appears.
The workaround is to click the Continue to this website (not recommended) link and continue to start
the device manager.
CSCsj60518 (Catalyst 520-24LC, 520-24PC, and 520-24TT switches)
The port configuration is lost if you press the Admin button repeatedly when the switch is entering
and exiting direct managed mode.
The workaround is to not repeatedly press the Admin button when entering and exiting direct
managed mode. Wait at least five seconds before each press of the Admin button.
CSCsj77293
You might not be able to complete the switch initial setup if you interrupt the process by either
disconnecting your PC from the switch or by changing your PC IP address settings.
The workaround is to restart the entire initial setup procedure, as described in the switch user guide.
CSCsk22971
If you end your browser session without saving changes to the setup parameters during initial setup
or in direct managed mode, and then open a new browser session, the Express Setup window or the
device manager page might not appear in the new browser session.
The workaround is to type in any URL (for example, www.cisco.com). The browser then displays
the Express Setup window or the device manager.
OL-14615-01