Configuring Zones; Chapter 6 Configuring Zone And Zone Set - Cisco AJ732A - MDS 9134 Fabric Switch Configuration Manual

Configuring Zones

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
This chapter includes the following sections:
•
•
•
Configuring Zones
Zones are configured within VSANs. The Logical tab displays the VSANs configured in the currently
discovered fabric. Note that zone information must always be identical for all the switches in the network
fabric. You can configure up to 8K zones in a VSAN.
To configure pWWN-based zones using the Zone configuration tool, follow these steps:
Click the Edit Local Full Zone Database icon as shown in
Step 1
Figure 6-2
Note
You see the Select VSAN dialog box. (See
Figure 6-3
Step 2 Select the VSAN where you want to configure zones or zone sets, or add members to a zone. (See
Figure
Cisco MDS 9000 Family Fabric Manager Quick Configuration Guide
6-2
Configuring Zones, page 6-2
Creating Zone Sets, page 6-4
What's Next?, page 6-6
Edit Local Full Zone Database
For details about the icons and buttons used in Fabric Manager, see
Quick Tour" section on page
Select VSAN
6-3.) Click OK.
Figure
4-6.
Figure 6-3.)
Chapter 6 Configuring Zones and Zone Sets
6-2.
"Fabric Manager Client
OL-7765-05