Nexus 5020 Switch
S e n d d o c u m e n t a t i o n c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
Supported SFP Transceivers
The Cisco Nexus 5020 switch supports both SFP+ Ethernet transceivers and SFP Fibre Channel
transceivers.
SFP+ Transceivers
The enhanced Small-Form-Factor Pluggable (SFP+) 10-Gigabit Ethernet transceiver module is a
bidirectional device with a transmitter and receiver in the same physical package. It has a 20-pin
connector on the electrical interface and duplex LC connector on the optical interface.The Cisco Nexus
5020 switch supports the SFP-10G-SR transceiver.
Model
SFP-10G-SR
Figure 1-16
Figure 1-16
SFP+ Copper Cables
Copper cables are available for use with the 10-Gigabit Ethernet SFP+ module. The cables come in the
following lengths:
•
•
•
•
Cisco Nexus 5000 Series Hardware Installation Guide
1-14
shows the SFP-10G-SR transceiver.
SFP+ 10-Gigabit Ethernet Transceiver Module
1m, 30AWG
3m, 28-30 AWG
5m, 26-28 AWG
7m, 24-26 AWG
Chapter 1
Description
10-Gigabit Ethernet—short range SFP+ module
Product Overview
OL-15902-01