NOTE:
Names dialog box.
Managing console switch tasks using the OSD
You can manage the HP KVM Server Console Switch G2 system from the Commands dialog box
("Accessing the Commands dialog
•
Engaging Scan mode
•
Managing user connections
•
Running diagnostics
•
Updating your firmware
Feature
Broadcast Enable
Scan Enable
IA Status
Display Versions
Run Diagnostics
Device Reset
Log Out
Changes made in the Name Modify dialog box are not saved until you click OK in the
box" on page 38) with the OSD, including:
("Activating Scan
Purpose
Begins broadcasting to your servers. Configures a server list for broadcasting under
the Setup dialog box.
Begins scanning your servers. Sets up a list for scanning in the Setup dialog box.
Upgrades multiple interface adapters simultaneously.
Displays version information for the console switch, and firmware information for
individual interface adapters. Enables you to upgrade individual interface adapter
firmware.
Validates the integrity of your system, including memory, firmware CRC,
communication interfaces, switch controllers, local and remote video, and interface
adapters.
Resets local console PS2 devices
Logs you out of the OSD. If password protection is enabled, you must enter the
screen saver password to continue logging out of the OSD.
mode" on page 28) and Broadcast mode
Local port operation 37