Upgrading interface adapter firmware simultaneously
From the Main dialog box
1.
Status. The IA Status dialog box appears.
Select PS/2, USB, or Serial, and then click Upgrade. The IA Upgrade dialog box appears.
2.
NOTE:
console switch by checking the Auto Upgrade box in the IA Status window.
Click OK to save settings.
3.
Press the Esc key to return to the Main dialog box
4.
The OSD indicators appear yellow while the upgrade is in progress. The indicators change to red
and then to green when the upgrade is complete.
NOTE:
Loading interface adapter firmware individually
("Accessing the Main dialog
You can configure automatic upgrades of all interface adapters connected to the
Wait until the OSD indicators are displayed as green before continuing.
box" on page 17), click Commands>IA
("Accessing the Main dialog
box" on page 17).
Upgrading the firmware 42