HP A7533A - Brocade 4Gb SAN Switch Base Release Note page 53

Hp storageworks fabric os 6.2.1 release notes (5697-0275, december 2009)
Hide thumbs Also See for A7533A - Brocade 4Gb SAN Switch Base:
Table of Contents

Advertisement

Fabric OS 6.2.0f fixes
Table 14
lists defects closed in the Fabric OS 6.2.0f firmware release.
Table 14 Fabric OS 6.2.0f closed defects
Closed defect summary
Unexpected termination of a Remote Procedure Call (RPC) daemon
occurs and then restarts non-disruptively.
UNIX-based host with Fibre Channel FastWrite (FCFW) enabled hangs
after a port disable/enable of HBA ports during a 400 MP Router re-
boot.
Executing configdownload via DCFM may cause a switch authen-
tication failure for clients using the HTTP service.
The Pathinfo command fails with a Destination Domain Un-
reachable error if it is executed on a switch running Fabric OS 6.1.x
and traverses through a switch running Fabric OS 6.2.x.
Supportshow command requires manual entry of numerous carriage
returns during output, but should not.
Console is not accessible on Brocade 8Gb SAN Switch for HP
BladeSystem c-Class.
ASSERT may be observed on the standby CP if ICL ports are in the
disabled state and moved to a different logical switch, and if
hafailover is executed without enabling those ports.
Fabric OS 6.2.0g fixes
Table 15
lists defects closed in the Fabric OS 6.2.0g firmware release.
Table 15 Fabric OS 6.2.0g closed defects
Closed defect summary
An HP StorageWorks Encryption SAN Switch goes into the a faulty
state after alternately rebooting each encryption switch in the configur-
ation at five-minute intervals.
A test that continuously disables/enables the ISLs to force failover/fail-
back between members of an encryption HA cluster showed a data
miscomparison on an overnight test cycle.
A test that continuously disconnects/reconnects the ISLs in an encryption
HA environment while I/O and rekeying are in progress, causes an
Encryption SAN Switch to go into the faulty state.
Solution
Fixed in Fabric OS 6.2.0f
Fixed in Fabric OS 6.2.0f
Workaround prior to upgrade:
Execute hafailover or hareboot.
Fixed in Fabric OS 6.2.0f
Fixed in Fabric OS 6.2.0f
Fixed in Fabric OS 6.2.0f
Fixed in Fabric OS 6.2.0f
Fixed in Fabric OS 6.2.0f
Solution
Fixed in Fabric OS 6.2.0g
Fixed in Fabric OS 6.2.0g
Fixed in Fabric OS 6.2.0g
HP StorageWorks Fabric OS 6.2.1 release notes
53

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ae370a - brocade 4gb san switch 4/12

Table of Contents