Setting Up The Card Slot As The Memory Card Drive Of The Computer - Canon iP6210D - PIXMA Color Inkjet Printer Printing Manual

Windows XP/Windows 2000/Windows Me: My Pictures
Windows 98: My Documents
Mac OS X v.10.2.1 or later: Pictures
Setting up the Card Slot as the Memory Card Drive of
the Computer
The card slot of the printer can also be used as the memory card drive of the computer.
To use the card slot of the printer as the memory card drive of the
computer, the printer must be connected to the computer and the
Memory Card Utility must have been installed for Windows Me/Windows
98/Windows 98 Second Edition. If the utility is not installed, install it
following the installation procedure explained in the Easy Setup
Instructions .
When OFF
photos in the memory card. After using the card slot as the memory card
drive of the computer, remove the memory card, then be sure to select
ON in the READ-ONLY MODE ON
ON ON
1
Ensure that the printer and the computer are turned on.
2
Press the Configuration
3
Use the
button.
4
Specify the READ-ONLY MODE
(1) Use the
- When selecting OFF
Photo data can be written into the memory card.
- When selecting ON
when printing photos.
(2) Press the OK
If you use the card slot of the printer as the memory card drive of the
computer, follow the instructions for removal of the memory card from the
computer, before removing it.
Windows: Right-click the removable disk icon and click Eject
Macintosh: Be sure to drag the
My Documents folder
My Documents My Documents
Pictures Pictures folder Pictures
OFF is selected in the READ-ONLY MODE
OFF OFF
READ-ONLY MODE screen again.
READ-ONLY MODE READ-ONLY MODE
Configuration button repeatedly to select OTHERS Configuration Configuration
buttons to select READ-ONLY MODE
READ-ONLY MODE. READ-ONLY MODE READ-ONLY MODE
buttons to select a mode.
OFF, the card slot is used as the memory card drive of the computer. OFF OFF
ON ON, the card slot is used only for reading. Be sure to select this mode ON
OK button.
OK OK
If Eject Eject is not displayed on the screen, ensure that the Eject Eject
indicator lamp is not flashing and remove the memory card.
My Pictures folder
My Pictures My Pictures
READ-ONLY MODE screen, you cannot print
READ-ONLY MODE READ-ONLY MODE
READ-ONLY MODE and then press the OK READ-ONLY MODE READ-ONLY MODE
icon into the Trash
OTHERS. OTHERS OTHERS
OK OK OK
Eject. Eject Eject
Trash. Trash Trash
35