Performing Bluetooth Communication - Canon iP6210D - PIXMA Color Inkjet Printer Printing Manual

Performing Bluetooth Communication

Printing through Bluetooth communication
When you print through Bluetooth communication from a mobile phone, refer to your mobile
phone manual.
1
Prepare to print.
(1) Confirm the printer is ON.
(2) Load the paper in the auto sheet feeder
See "Loading Paper" on page 12.
2
Connect the Bluetooth unit BU-20 to the direct print port.
3
Set the print setting.
See "Setting the Page Size, Media Type, and Layout When Printing From a Mobile
Phone" on page 30.
4
Start printing from a mobile phone.
• When you select the device name, select the initial value of this printer "Canon
iP6210D-1".
• If you are required to enter the passkey, enter the initial value "0000".
You can change the device name of the printer or passkey in Bluetooth settings on the
printer. See "Changing the Bluetooth Settings-Bluetooth settings" on page 33.
32
Communication is possible up to about ten meters depending on the
conditions below. The printing speed may change depending on the
following conditions:
- Presence of obstacles between the communication equipment and
radio wave conditions.
- Presence of magnetic fields, static electricity or electromagnetic
interference.
- Receiver sensitivity and antenna performance of the
communication equipment.