Diagnostics; Switch Status Indicators - HP A7340A - Surestore FC 1Gb/2Gb Switch 16B Quick Start Manual

Hp surestore 1gb/2gb switch 16b quick start guide

Hide thumbs Also See for A7340A - Surestore FC 1Gb/2Gb Switch 16B:

Table of Contents

System activity and status can be determined through the activity of the

LEDs on the switch.

The LEDs may flash yellow during diagnostic tests; green, yellow,

Note

or orange during POST. This is normal and does not indicate a problem

unless the LEDS do not return to a normal pattern after POST or the other

diagnostic tests are complete.

The HP Surestore FC 1Gb/2Gb Switch 16B includes the following LEDs:

• 16 port status LEDs on the SFP media side (above and to the left of each

port) to indicate the status of each port.

• 16 port speed LEDs on the SFP media side (above and to the right of

each port) to indicate the current link speed of each port.

• One switch power LED below the serial port on the SFP media side, to

indicate whether the switch is on and has successfully booted.

• Two power supply LEDs on the power supply side (one on each power

supply) to indicate the status of each power supply.

DIAGNOSTICS

Table of Contents