Chain And Guide Bar Combination - Echo CS-271T Instruction Manual

CHAIN AND GUIDE BAR COMBINATION

The following combinations are recommended for model CS-271T.
Guide bar
Length mm (in)
254 (10)
305 (12)
CS-271T
Part No.
10A4CD3740
10A0CD3740
12A4CD3745
12A0CD3745
Saw chain
Pitch mm (in)
9.53 (3/8)
9.53 (3/8)
GUIDE BAR
(Low-kickback)
Replacement guide bars.
The following guide bars may be considered to
have equivalent kickback energy.
• Sprocket nose guide bars of the same length
and nose radius, same pitch and having the
same number of teeth.
• Hard nose guide bars of the same length and
nose radius as a sprocket nose bar.
SAW CHAIN
(Low-kickback)
Do not use replacement saw chain unless it
has been designated as meeting the ANSI
B175.1 - 2000 kickback performance
requirements, when tested on the
representative sample of chain saws below
3.8 c.i.d. specified in ANSI B175.1 - 2000.
NOTE
LOW KICKBACK SAW CHAIN meets the
kickback performance requirements of ANSI
B175.1-2000 (safety requirements for gasoline-
powered chain saws).
22
Part No.
90SG40CQ
91VG40CQ
90SG45CQ
91VG45CQ
CAUTION
Links
40
45