Chain And Guide Bar Combination - Echo CS-355T Operator's Manual

CHAIN AND GUIDE BAR COMBINATION

The following combinations are recommended for model CS-355T.
Guide bar
Length mm (in.)
305 (12)
356 (14)
406 (16)
ECHO Part No. Pitch mm (in.)
12A0ES3745
12A0ED3745
14A0ES3752
14A0ED3752
16A0ES3757
16A0ED3757
Saw chain
9.53 (3/8)
GUIDE BAR
(Low-kickback)
Replacement guide bars.
The following guide bars may be considered to
have equivalent kickback energy.
• Sprocket nose guide bars of the same length
and nose radius, same pitch and having the
same number of teeth.
• Hard nose guide bars of the same length and
nose radius as a sprocket nose bar.
SAW CHAIN
(Low-kickback)
Do not use replacement saw chain unless
it has been designated as meeting the ANSI
B175.1 kickback performance requirements,
when tested on the representative sample of
chain saws below 3.8 c.i.d. specifi ed in ANSI
B175.1.
NOTICE
LOW KICKBACK SAW CHAIN meets the
kickback performance requirements of ANSI
B175.1 (safety requirements for gasoline-
powered chain saws).
23
ECHO Part No.
91PXL45CQ
91PX45CQ
91PXL52CQ
91PX52CQ
91PXL57CQ
91PX57CQ
CAUTION
Links
45
52
57
CS-355T