Garmin Forerunner 305 - Running GPS Receiver Quick Reference Manual page 2

WARNING: See the Forerunner owner's manual for
product warnings and other important information.
Step 1: Activate
The foot pod is on standby and ready to send data.
As soon as you install or move the foot pod, the LED
blinks three times.
Step 2: Install
1. Press the tabs on the lace clip. Lift and separate the
foot pod from the lace clip.
2. Loosen your shoe laces slightly.
3. Thread the lace clip through 2–3 secure sections of
your shoelaces, allowing enough room at the top to
tie the shoelaces.
4. Tie your shoelaces securely to keep the foot pod in
place during your workout.
5. Snap the foot pod into the lace clip. The foot pod
must be pointed toward the front of your shoe.
Step 3: Pair
Pairing is the connecting of ANT+Sport
sensors, like your foot pod with a Forerunner. After
you pair the first time, your Forerunner automatically
recognizes your foot pod each time it is activated.
Note: The pairing instructions differ for
each Forerunner model. See your owner's
manual.
EN–
Lace clip
wireless
™