Contents; Assembly; Install Blower Pipes - Echo PB-620 Operator's Manual

C
ONTENTS
___ 1 - Power Head
___ 1 - Flex Pipe
___ 1 - Pipe w/swivel
___ 1 - Straight Pipe
___ 1 - Straight Pipe w/decal
___ 1 - Operator's Manual
___ 1 - Warranty Registration Card
___ 1 - ECHO Emissions and Warranty Statement
___ 1 - Plastic Bag
___ 2 - Clamps w/screws
___ 1 - Guide Loop
___ 1 - Echo Power Blend X
A
SSEMBLY
WARNING
Never perform maintenance or assembly procedures with engine
running or serious personal injury may result.

INSTALL BLOWER PIPES

1. Place guide loop (G) across elbow clamp, and turn until clips
fully engage clamp band.
2. Assemble clamps (A) onto both ends of flexible pipe (B).
NOTE
Clamp with cable guide loop (G) fits elbow end of flexible pipe.
3. Assemble swivel pipe (C) into flexible pipe (B).
NOTE
Assure throttle cable is not twisted before installing handle (E).
4. Position cable between the elbow (D) and frame and along the
top of the flexible pipe. Loosen knob (H) on handle (E). Align
notch in handle with tabs (F). Install onto swivel pipe (C) past
long ridges in pipe.
2-stroke oil sample
TM
P B
OWER LOWER
O ' M
PERATOR S ANUAL
G
G B
A
B
D
C
9
G
A
E
F
H