Specifications - Echo PB-46HT Operator's Manual

S
PECIFICATIONS
Dimensions
Engine
Exhaust System
Carburetor
Ignition System
Starter System
Fuel System
Maximum Air Speed
(measured at pipe end)
Average Air Volume
(measured at pipe end)
Maximum Air Volume
(measured at housing)
* Certain internal combustion engines operated in forest, brush and/or grass-covered areas in Washington, Oregon,
Idaho, California, Minnesota, New Jersey and Maine must be equipped with a spark arrestor. This requirement also
applies to all U.S. Forest Service lands. In some of these areas, the spark arrestor system must be certified per USDA
Forest Service regulations SAEJ335. Check with your local or state authorities for specific regulations in your area.
Failure to follow these requirements is a violation of the law.
Important:
This spark ignition system complies with Canadian ICES-002
Length 320 mm (12.6 in.)
Width 460 mm (18.1 in.)
Height 440 mm (17.3 in.)
Weight PB-46 HT/LN TYPE1E
(HT) 10.2 kg (22.4 lb.)
(LN) 11kg (24.5 lb.)
Type Air-cooled, two-stroke, single cylinder gasoline engine
PB-46 HT/LN TYPE1E
Bore 40.0 mm (1.574 in.)
Stroke 35.0 mm (1.378 in.)
Displacement 44cc (2.69 cu. in.)
*Spark arrestor muffler
ZAMA diaphragm type w/purge
Idle Speed 2600 to 2800 RPM
Maxium Speed 6400 to 6600 RPM*
Flywheel magneto, CDI System
Spark Plug NGK BPM-7Y 0.65 mm (0.026 in.)
Recoil starter
Fuel Mixed (gasoline and oil)
Fuel/Oil Ratio 50:1
Gasoline 89 octane unleaded. Do not use fuel containing methyl
alcohol, more than 10% ethyl alcohol or 15% MTBE.
Oil 50:1 ECHO High Performance 2-Stroke engine oil
Fuel Tank Capacity 1.9 lit. (64.3 U.S. fl. oz.)
PB-46 HT/LN TYPE1E
170 MPH
(miles/hour)
365 CFM
(cubic feet/minute)
740 CFM
(cubic feet/minute)
P B
OWER LOWER
O ' M
PERATOR S ANUAL
PB-60 HT TYPE1E
HT 10.1 kg (22.2 lb.)
PB-60 HT TYPE1E
46.0 mm (2.811 in.)
35.0 mm (1.378 in.)
58.2cc (3.55 cu. in.)
7400 to 7600 RPM*
PB-60 HT TYPE1E
195 MPH
(miles/hour)
405 CFM
(cubic feet/minute)
840 CFM
(cubic feet/minute)
11