Ul Listings And Instructions - Chamberlain Miracle-One Instruction Manual

E T L E T L E T L L I S T I N G S L I S T I N G S L I S T I N G S
Installation Instructions Regarding the Gate Operator
A) Install the gate operator only when:
The operator is appropriate for the construction and the usage class of the gate.
1.
All exposed pinch points are eliminated or guarded, and
2.
3. Guarding is supplied for exposed rollers.
B) The operator is intended for installation only on gates used for vehicles. Pedestrians must be
supplied with a separate access opening.
The gate must be installed in a location so that enough clearance is supplied between the gate
C)
and adjacent structures when opening and closing to reduce the risk of entrapment. Swinging
gates shall not open into public access areas.
D) The gate must be properly installed and work freely in both directions prior to the installation of
the gate operator.
Controls must be far enough from the gate so that the user is prevented from coming in contact
E)
with the gate while operating the controls. Controls intended to be used to reset an operator after
2 sequential activations of the entrapment protection device or devices must be located in the line
of sight of the gate outdoor. Easily accessible controls shall have a security feature to prevent
unauthorized use.
F) All warning signs and placards must be installed where visible in the area of the gate. A minimum
of two placards shall be installed. A placard is to be installed in the area of each side of the gate
and be visible to person located on the side of the gate on which the placard is installed.
A N D A N D A N D I N S T R U C T I O N S I N S T R U C T I O N S I N S T R U C T I O N S
2