Western Digital WDBBEP0010BBK User Manual page 26

WD SmartWare Initial Drive Setting Screen
(After selecting Skip Backup at step 6 or
Continue to Settings at step 7 on page 21)
Figure 9. Initial Drive Settings Screens
Note: The initial Drive Settings screens only appear one time—the first time you
install the WD SmartWare software on your computer. After that,
launching the software displays the Home screen so you can choose what
you want to do.
9. On the initial Drive Settings screen:
a. Depending on the hardware configuration of your My Book
ee:
s
-
"Naming the Drive" on page 41
-
"Password Protecting the Drive" on page 25
-
"Registering the Drive" on page 42
b. After naming, password protecting, or registering your drive, click Finish to close
the initial Drive Settings screen.
This completes the getting started procedure after selecting Install Drive Settings.
In this case:
• Opening the WD SmartWare software displays the drive management Home
screen (see Figure 11 on page 23) with the Settings tab for performing all drive
management functions (see "Managing and Customizing the Drive" on page 39).
• Clicking the Settings tab displays the drive management Drive Settings screen
with a Preferences button that you can use to enable the WD SmartWare
backup and retrieve functions (see "Enabling the Backup and Retrieve
Functions" on page 49)
Drive Management Initial Drive Settings Screen
(After selecting Install Drive Settings at step 1 on
page 18)
.
INSTALLING THE SOFTWARE AND GETTING STARTED – 22
WD SMARTWARE SOFTWARE
USER MANUAL
or My Passport drive,