Using The Drive With A Mac; Reformatting The Drive; Installing On A Mac Os X Tiger/Leopard/Snow Leopard - Western Digital WDBACX7500Axx - My Passport Essential SE User Manual

Using the Drive with a Mac

8
1
The My Passport Essential drive that you have purchased is preformatted as a single
NTFS partition for compatibility with all updated Windows operating systems. If desired,
you can reformat it to HFS+J for Mac OS X operating systems.
This chapter includes the following topics:

Reformatting the Drive

Installing on a Mac OS X Tiger/Leopard/Snow Leopard

Enhancing Performance with WD +TURBO
Using the WD SmartWare Icon
Opening WD SmartWare Software
Dismounting the Virtual CD
Safely Dismounting the Drive
Displaying the Status, Serial Number, and Temperature
Unlocking the Drive Manually
Uninstalling WD SmartWare Software
Reformatting the Drive
CAUTION! Reformatting the drive erases all its contents. If you have already
saved files on the drive, be sure to back them up before reformatting it.
Go to support.wdc.com. Refer to Knowledge Base Answer ID 3323 for reformatting the
drive to Mac OS X format. (See ID 3645 for formatting a Mac to the NTFS file system for
use on Windows XP and ID 3647 for formatting it for Windows Vista). See
"Troubleshooting" on page 54 for more information about reformatting a drive.
If you reformat your drive for use with a Mac, follow the procedures below.
Installing on a Mac OS X Tiger/Leopard/Snow Leopard
1.
Turn on your computer.
2. Connect the drive's USB cable as shown in Figure 1 on page 5 or Figure 2 on page 6.
The WD SmartWare CD displays on the desktop and is listed under Devices in
Finder:
The My Passport icon also displays on the desktop:
MY PASSPORT ELITE
USER MANUAL
USING THE DRIVE WITH A MAC – 43