Unpacking; Contents; Shipping Damage; Returning A Processor To Eaw - EAW UX8800 Owner's Manual

2

UNPACKING

2 . 1 C o n t e n t s
1 UX8800 Digital Processor
1 set Internal support packaging
1 IEC Power cable 6 ft / 2 m with Nema 15-3 ac mains plug for 115V / 120 V
1 IEC Power cable 6 ft / 2 m with Schuko type ac mains plug for 220 V / 240 V
1 Ethernet crossover cable 7 ft / 2.1 m
1 4 A, slow-blow replacement fuse (in rear panel fuse drawer)
1 UX8800 Owner's Manual (this document)
1 CD-ROM with EAWPilot control software and a trial version of Smaart v.6
1 Product registration instructions
2 . 2 S h i p p i n g D a m a g e
If you find the processor is damaged after unpacking, save the packing materials for the carrier's
inspection, notify the carrier immediately, and file a shipping damage claim. Although EAW will help in
any way possible, it is always the responsibility of the receiving party to file any shipping damage claim.
The carrier will help prepare and file this claim.
2 . 3 R e t u r n i n g a P r o c e s s o r t o E AW
If the processor must be returned, contact EAW for a Return Authorization. Use the original shipping
carton and packing materials. If the shipping carton is damaged, contact EAW for a new carton at a nominal
charge. EAW will not be responsible for damage caused by inadequate packing.
Page 2