12x8 digital matrix mixer and signal processor (20 pages)
Summary of Contents for EAW UX8800
Page 1
• IEC Power cable 6 ft/ 2 m with Nema 15-3 ac mains plug for 115V / 120V • IEC Power cable 6 ft/ 2 m with Schuko type ac mains plug for 220V / 240V If any of these items were not included in your package please contact EAW @ 800-992-5013 1. Please read the manual 2.
Page 2
1. Please read the manual www.eaw.com/eaw/processor_info/Current_Processor/UX8800/UX8800_Manual/ Inside the manual you will find all the specifics of UX8800, how it works, and how to connect with the UX8800. A thorough review of the manual will provide an overview of the UX8800. If you have questions, please call ASG @ 1-800-992-5013.
Page 3
Step Three: Step Four: Select Network and Internet Connections Select Network Connections Step Five: Right click Local Area Connection and select Properties...
Page 4
Press the tab key and your subnet mask will automatically populate. Subnet Mask: 255.255.255.0 Step Eight: Click Ok Now that we have set the static IP address in your computer we need to verify and set up the IP address in your UX8800...
Page 5
To check the firmware version currently installed on your UX8800 you will need to access the UTIL settings via the front panel controls of the UX8800. Use the jog wheel to scroll through the UTIL menu and select About… by pressing in on the jog wheel. The firmware version will be displayed.
Page 6
When connection is established this will turn into a green check mark. If this check mark is red you will need to go back and verify steps 3 and 4. Click and drag the UX8800 icon to the design column located to the left of the found devices tab.