Installing The Onetouch Iii Mini Edition; Step 1 - Connect The Drive; Step 2 - Install The Software - Maxtor OneTouch FireWire User Manual

MAXTOR ONETOUCH III MINI EDITION MACINTOSH INSTALLATION

Installing the OneTouch III Mini Edition

Step 1 – Connect the Drive
1. Connect the small connector on the 'Y' cable to your
OneTouch III Mini Edition and the red connector to any one
of the USB ports on your computer.
Note: If your computer does not supply enough power to
the OneTouch III Mini Edition through the red connector,
plug in the unused black connector on the 'Y' cable to
another USB port on your computer (or a powered USB
hub).
If both ports fail to supply enough power to the drive, an
optional power supply should be purchased from Maxtor at
www.maxstore.com
FIGURE 3 CONNECTING THE ONETOUCH III MINI EDITION
Small
Connector
Black Red
Connector Connector
PAGE 19
Step 2 – Install the MaxBack Software
NOTE: You must first install this software in order to use the
OneTouch button and other OneTouch III features.
Highly Recommended – Copy all files on the OneTouch III Mini
Edition to your local hard drive.
1. Double-click on the USB icon for the OneTouch III Mini
Edition located on your Desktop.
2. From the Finder window, double-click on the Mac
OneTouch Mini.dmg file.
3. Double-click on the icon labeled Mac OneTouch III Mini
located on your Desktop.
4. Select the folder associated with your language
(e.g., English).
5. Double-click on the icon labeled OneTouch Manager.
6. From the Welcome screen, click Continue.
7. Review the Software License Agreement and click
Continue.
8. To confirm, click Agree.
9. Select a Destination (e.g., Macintosh HD) and click
Continue.