RocketFish RF-BCD2 User Manual page 19

The exposure standard for wireless devices including mobile USB
Modems and wireless modems uses a unit of measurement known
as the Specific Absorption Rate, or SAR. Tests for SAR are conducted
using standard operating positions reviewed by the FCC with the
device under test transmitting at its highest certified power level in
all frequency bands. Although the SAR is determined at the highest
certified power level, the actual SAR level of the USB Modem or
modem while operating can be well below the maximum value. This
is because the USB Modem is designed to operate at multiple power
levels so as to use only the power required to reach the network. In
general, the closer you are to a wireless base station antenna, the
lower the power output.
Before this device is made available for sale to the public, it must be
tested and certified to the FCC that it does not exceed the limit
established by the government-adopted requirement for safe
exposure. The tests are performed in positions and locations (for
example, at the ear or worn on the body) as required by the FCC for
each model.
The FCC has granted an Equipment Authorization for this wireless
Modem with all reported SAR levels evaluated as in compliance with
the FCC RF exposure guidelines. The highest SAR value for this
Modem when tested for compliance against FCC standards was
1.53 W/KG User-Lap position.
Cellular Service Agreement
The USB Broadband Device uses a wireless digital service that is
furnished by Best Buy Connect, a mobile virtual network operator
("MVNO"). The MVNO disclaims all liability of any nature to the
customer and any third party, whether direct, indirect, incidental or
consequential, arising out of the customer's use of the USB
Broadband Device, and customer agrees that customer shall have no
claims against the MVNO of any kind with respect thereto.
RF-BCD2 USB Broadband Device
19