Inserting Or Removing A Microsd™ Memory Card - RocketFish RF-BCD2 User Manual

• When you are finished using the device, use the program
to disconnect from the network.
• When you are disconnected from the network, exit the
program and eject the device before removing it from
your PC. You can also remove the device after your PC is
shut down.
Inserting or removing a microSD™ memory
card
Your USB broadband device has a microSD memory card slot
that is hot-swappable. You can insert or remove the memory
card whether your USB broadband device is connected to a
PC or not.
Cautions:
Do not force the microSD memory card into the slot. You
may damage the card or the slot.
Do not remove the card while data is being transferred. You
may corrupt or lose the data.
To insert or remove a microSD memory card:
1 If this is the first time you are inserting a memory card,
remove the plastic insert in the memory card slot by
gently pressing in on the blank. When the blank pops out
slightly, pull the blank from the slot.
RF-BCD2 USB Broadband Device
11