Connecting And Disconnecting From The Network - RocketFish RF-BCD2 User Manual

Connecting and disconnecting from the
network
To connect and disconnect from the network:
1 Plug your USB broadband device into a USB port on your
computer.
2 Double-click the
3 Click Connect.
Note: If the device status says No Device Detected, unplug your
USB broadband device and plug it in again.
4 When you have finished with your Internet session, click
Disconnect, then unplug your USB broadband device.
Daily use
After your USB broadband device is set up and the software
is installed, daily use is easy.
• On most computers your USB broadband device's label
faces up.
• Your USB broadband device has power when you
connect it to your PC. However, it does not automatically
connect to the Internet.
• When you plug your USB broadband device into a PC,
the LED indicator lights up.
• If sound effects are enabled on the computer, the
computer might beep.
• The Best Buy Connect software opens automatically,
unless the auto-launch feature is disabled.
10
desktop icon.
RF-BCD2 USB Broadband Device