Current IGMP Snooping Group Entries
Open the IGMP Snooping folder in the L2 Features menu and click on the IGMP Snooping settings link. This will open
the Current IGMP Snooping Group Entries window, as shown below:
Clicking the Modify button will open the IGMP Snooping Settings window, shown below:
The following parameters can be set:
Parameter
Host Timeout
MRouter Timeout
Leave
Timer
(0-25
sec)
State
Static Router Port Entries
Open the IGMP Snooping folder in the L2 Features menu and click on the IGMP Snooping settings link. This will open
the Current Static Router Port Entries window, as shown below:
DGS-3048 Gigabit Ethernet Switch Manual
Figure 8- 12. Current IGMP Snooping Group Entries window
Figure 8- 13. IGMP Snooping Settings Window
Description
Specifies the maximum amount of time a host can be a member of a multicast group
without the Switch receiving a host membership report. The default is 260 seconds.
Specifies the maximum amount of time a route can be a member of a multicast group
without the Switch receiving a host membership report. The default is 300 seconds.
Leave timer. The default is 2 seconds.
Allows the user to enable or disable IGMP snooping for the specified VLAN.
58