Osd Set; Lcd Brightness; Lcd Save - Samsung NV40 User Manual

Setup menu (

OSD set

You can check shooting (Recording mode) and displayed image (Play
back mode) information.
Full OSD set

Basic OSD set
Function Description LCD Bright
Hide

LCD Save

Start Image
Exit:BACK
[Recording mode menu]
[Full] : When the smart button is touched, the icons will be
enlarged and OSD will be displayed.
[Basic] : When the smart button is touched, the icons will be
enlarged and OSD will not be enlarged.
[Function Description] : Function description is displayed to provide detailed
information on a function.
[Hide] : If the camera doesn't operate for about 3 seconds,
all OSD will disappear. When the shutter is pressed
down or half way down, the available number of
shots, shutter speed, Aperture value and Auto focus
area will be displayed. OSD may be displayed by
using the camera buttons except for the shutter
button.
<< 66 >>
)
Full OSD set
Basic OSD set

Hide LCD Bright
LCD Save
Start Image
Exit:BACK
[Play back mode menu]

LCD brightness

You can adjust the LCD brightness.
- Sub menus : [Auto], [Dark], [Normal], [Bright]
- If the [Auto] menu is selected, the LCD brightness
will be set automatically according to the shooting
conditions.
- If the [Auto] menu is selected in the Playback
mode, the LCD brightness is fixed as the [Normal]
menu.
LCD save
If the camera is not used for about 30 seconds,
the power and camera status lamps blink and
the LCD monitor turns off. (LCD save is only
applied to the Recording mode menu.)
Auto OSD set
Dark OSD set
Normal  LCD Bright
Bright LCD Save
Start Image
Exit:BACK
Off OSD set
On OSD set
LCD Bright
 LCD Save
Start Image
Exit:BACK