Table of Contents
Advertisement
Troubleshooting
Problem
The camera will
not turn on.
No image on
the LCD
monitor
Shutter release
button will not
work.
10
114
Cause
No batteries are
installed.
Battery/card cover is
open.
Battery is installed
incorrectly.
Battery is exhausted.
Camera is connected to
PC with USB cable.
Camera is connected to
TV.
Image is displayed but
hard to see.
Flash is charging.
SD Memory Card is full. Insert an SD Memory Card that is not full,
Camera is recording.
Remedy
Check whether battery is installed. If not,
install battery.
Close the battery/card cover.
Check polarity of battery.Reinsert battery
according to the +- symbols in the
battery compartment.(p.13)
Install new batteries in the camera or use
the AC adapter.
The LCD monitor is always turned off
when the camera is connected to a PC.
The LCD monitor is always turned off
when the camera is connected to a TV.
Images on the LCD monitor may be hard
to see when taking pictures outside in
sunlight.
While the flash status lamp is blinking red,
the flash is being charged and a picture
cannot be taken.The lamp lights red when
charging is complete.
or delete unwanted images.(p.16, 80)
Please wait until recording is finished.
Advertisement
Table of Contents
