Using Advanced Surround; Listening In Stereo; Using The Sound Retriever; Listening With Acoustic Calibration Eq - Pioneer HTS-560DV Operating Instructions Manual

Listening to your system

Using Advanced Surround

The Advanced Surround effects can be used with any
multichannel or stereo source for a variety of additional
surround sound effects.
ENTER
TOP MENU
SOUND
ST
• Press ADVANCED to select an Advanced Surround
mode.
Press repeatedly to select:
• ADVMOVIE – Suitable for movies
• ADVMUSIC – Suitable for music
• EXPANDED – Wide sound field
• TV SURR. – Surround sound for mono or stereo TV
broadcasts
• SPORTS – Suitable for sports programming
• GAME – Suitable for TV game units
• VIRTUAL – A virtual surround effect using just the
subwoofer and front speakers.
• 5 STEREO – Powerful surround sound for stereo
music sources

Listening in stereo

You can listen to any source—stereo or multichannel—in
stereo. When playing a multichannel source, all
channels are downmixed to the front left/right speakers
and the subwoofer.
DVD DTV
ENTER
TOP MENU
SOUND
• Press SURROUND repeatedly until STEREO shows in
the display.
• You can also use the SURROUND button on the
display unit to change the listening mode.
TUNER
SR
SURROUND
ADVANCED
CLEAR
TUNE MENU
SETUP
ENTER ST
RETURN
PC/GAME AUX
TUNER
SR
SURROUND
ADVANCED
CLEAR
MENU
TUNE
SETUP

Using the Sound Retriever

When audio data is removed during the MP3 or WMA
compression process, sound quality often suffers from
an uneven sound image. The Sound Retriever feature
employs new DSP technology that helps bring CD quality
sound back to compressed 2-channel audio by restoring
sound pressure and smoothing jagged artifacts left over
after compression.
TEST
TONE
AUDIO SUBTITLE
PLAY MODE
TV
• While listening to a stereo source, press SOUND
RETRIEVER .
Press repeatedly to switch between:
• RTRV ON — Switches the Sound Retriever on.
• RTRV OFF — Switches the Sound Retriever off.

Listening with Acoustic Calibration EQ

You can listen to sources using the Acoustic Calibration
EQ set in Using the Auto MCACC setup for optimal
surround sound on page 20.
SURROUND
ADVANCED
ENTER CLEAR
TOP MENU TUNE MENU
SOUND SETUP SETUP
ST ENTER ST
RETURN
TEST MCACC
TONE
TUNE
1 Press SHIFT+ SOUND .
2 Use the SHIFT+ (cursor left/right) buttons to
select MCACC EQ then press SHIFT+ ENTER .
3 Use the SHIFT+ (cursor up/down) buttons to
switch EQ ON or EQ OFF then press SHIFT+ ENTER to
confirm.
• On the EQ OFF setting, equalization is set to off and
speaker settings (channel delay and channel level)
remains as it is set.
• Acoustic Calibration EQ is set to on automatically
after Auto MCACC setup is used.
MCACC
TUNE
SOUND
ANGLE RETRIEVER
ZOOM DISPLAY SLEEP
INPUT
SETUP
SOUND
AUDIO SUBTITLE ANGLE RETRIEVER
PLAY MODE ZOOM DISPLAY SLEEP
TV
INPUT
CHANNEL VOLUME
SHIFT TV CONTROL
06
23
En