JVC HX-D7 Instructions Manual page 40

Compact component system
Hide thumbs Also See for HX-D7:
Table of Contents

Advertisement

Available languages

Available languages

PICTURE SOURCE
You can obtain optimal picture quality by selecting an
appropriate option—picture source type (either video source
or film source).
Select one of the following:
AUTO: Normally select this.
When playing back a disc containing both video
and film sources, the System automatically
changes the processing to match it to the picture
type (film or video source) of the current chapter.
FILM:
To play a film source disc.
VIDEO: To play a video source disc.
SCREEN SAVER
You can activate or deactivate screen saver while operating
the built-in disc player.
Select one of the following:
ON:
The picture on the TV becomes dark when no
operation is done for about 5 minutes.
OFF:
To cancel the screen saver.
FILE TYPE
If both audio tracks (MP3/WMA files) and still picture
(JPEG files) are recorded on a disc, you can select which to
play.
Select one of the following:
AUDIO:
To play MP3/WMA files.
STILL PICTURE:
To play JPEG files.
37
7 AUDIO Set up Menu
You can adjust the sound settings of the System.
AUDIO
DIGITAL AUDIO OUTPUT
DOWN MIX
D. RANGE COMPRESSION
SELECT
USE
TO EXIT, PRESS [SET UP].
ENTER
DIGITAL AUDIO OUTPUT
When using the digital output terminal on the rear, set this
correctly according to the connected component.
Select one of the following:
PCM ONLY:
To connect to a linear PCM digital
equipment such as an MD recorder.
DOLBY DIGITAL
To connect to a Dolby Digital decoder
/PCM:
or an amplifier with a built-in Dolby
Digital decoder.
STREAM/PCM:
To connect to a DTS decoder or an
amplifier with a built-in DTS decoder.
• See also "OPTICAL DIGITAL OUTPUT Signals" on
page 43.
DOWN MIX
When playing a multi-channel DVD, the System converts
the signals into 2 channels.
Down mix setting is effective for the speaker output (and
digital audio output if "DIGITAL AUDIO OUTPUT" is set
to "PCM ONLY") from this System.
Select one of the following:
STEREO:
To connect a conventional stereo
amplifier, receiver, MD player, TV, etc.
DOLBY
To connect an amplifier with the Dolby
SURROUND:
Pro Logic decoder.
INFO
STREAM/PCM
DOLBY SURROUND
AUTO
TO SELECT. USE ENTER TO CONFIRM

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hx-d77Ca-hxd77Sp-hxd77

Table of Contents