Turtle Beach Ear Force XL1 User Manual page 9

1. Mode Selection Switch
Slide to change between PS3, XBOX 360, and PC/Mac modes.
2. LED Indicator
A solid LED indicates the Transmitter is powered on and communicating with the Headset. A slowly blinking
LED indicates the Transmitter can't communicate with the headset because it is powered off, not paired,
or out of range. If this occurs, please refer to "Pairing the Headset and Transmitter" on pg. 8.
3. Pairing Button
Press and hold for 3 seconds to activate pairing mode. The LED will begin to blink rapidly.
(See "Pairing the Headset and Transmitter" on pg. 8 for further details)
4. Game Audio Input Jack
Insert the 3.5mm end of the included RCA Splitter Cable into this jack.
5. USB Port
Insert the included Transmitter Power Cable into this port. Insert the other end into an available USB port on
your gaming console or computer.
6. Auxiliary Input Jack
Provides a 3.5mm input for digital music players or additional audio sources (cable sold separately). The audio
from the auxiliary input will be mixed with the game audio and can be adjusted with the game volume control on
the headset.
NOTE: The auxiliary input is only active in PS3 and XBOX 360 modes.
7. Charging Port
Used for recharging the Headset battery. Insert one end of the included Headset Charging Cable into
this port and insert the other end into the USB/CHARGE port on the Headset. You can continue to use
the headset while charging.
6