Hardware Upgrades
✎
2–18
7. Install two guide screws on each side of the adapter 1 .
8. Install the adapter in the desired drive bay 2 by sliding it into the
front of the drive cage; the drivelock automatically secures the
adapter when it snaps into place.
The primary 3.5-inch diskette drive should only be installed into
bay 3. Bay 3 is the topmost bay in the desktop configuration.
Aligning the Guide Screws and Installing an Adapter with a
3.5-Inch Drive on a Minitower (top) and a Desktop (bottom)
Hardware Reference Guide