Compaq Evo Workstation w4000 - Convertible Minitower Hardware Reference Manual page 32

✎
✎
Hardware Reference Guide
3. Install two guide screws on each side of the drive 1 .
Some options use metric hardware. Extra guide screws are provided
on the front of the chassis, under the front bezel. The Compaq
supplied metric screws are black.
4. Install the drive in the desired drive bay by sliding it into the front
of the drive cage 2 ; the drivelock automatically secures the drive
in the bay.
Be sure the guide screws line up with the guide slots in the drive cage.
Aligning the Guide Screws and Installing an Optional 5.25-Inch
Drive on a Minitower (top) and a Desktop (bottom)
Hardware Upgrades
2–15