Expansion Cards - HP dx7510 - Microtower PC Service & Reference Manual

Service reference guide: hp compaq dx7510/dx7518 business pc
Hide thumbs Also See for dx7510 - Microtower PC:
Table of Contents

Advertisement

Expansion Cards

The computer has two standard PCI expansion slots, one PCI Express x1 expansion slot, and one PCI
Express x16 expansion slot. The expansion slots accommodate full-height or half-height expansion
cards.
Figure 6-7
Table 6-2
Expansion Slot Locations
Item
1
2
3
4
NOTE:
You can install a PCI Express x1, x4, x8, or x16 expansion card in the PCI Express x16
expansion slot.
To remove, replace, or add an expansion card:
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
Locate the correct vacant expansion socket on the system board and the corresponding expansion
slot on the back of the computer chassis.
40
Chapter 6 Removal and Replacement Procedures Microtower (MT) Chassis
Expansion Slot Locations
Description
PCI expansion slot
PCI expansion slot
PCI Express x1 expansion slot
PCI Express x16 expansion slot
(Access Panel on page
(Preparation for Disassembly on page
33).
32).

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dx7518 - microtower pcCompaq dx7510Compaq dx7518

Table of Contents