Installing An Internal 3.5-Inch Hard Drive - HP dx7500 - Microtower PC Hardware Reference Manual

10. Remove the four screws that secure the hard disk drive to the hard drive cage (1), then slide the
hard disk drive out of the hard drive cage (2).
Figure 2-30
NOTE: To install an internal 3.5-inch hard drive, refer to
on page 35.

Installing an Internal 3.5-inch Hard Drive

1. Follow the steps in
cage and, if necessary, the existing hard drive.
ENWW
Removing the Hard Drive
Removing an Internal 3.5-inch Hard Drive on page 32
Installing an Internal 3.5-inch Hard Drive
to remove the hard drive
Installing Additional Drives 35