Drive Positions - HP dx7500 - Microtower PC Hardware Reference Manual

Microtower model business pc
Hide thumbs Also See for dx7500 - Microtower PC:
Table of Contents

Advertisement

15.
Reconnect the power cord and any external devices, then turn on the computer.
16.
Lock any security devices that were disengaged when the access panel was removed.
17.
Reconfigure the computer, if necessary. Refer to the Computer Setup (F10) Utility Guide for
instructions on using Computer Setup.

Drive Positions

Figure 2-15
1
Two 5.25-inch external drive bays for optional drives (optical drives shown)
2
One 3.5-inch external drive bay for optional drive (media card reader shown)
3
Primary 3.5-inch internal hard drive bay
4
Secondary 3.5-inch internal hard drive bay for optional hard drive
To verify the type, size, and capacity of the storage devices installed in the computer, run Computer
Setup. Refer to the Computer Setup (F10) Utility Guide for more information.
ENWW
Drive Positions
Drive Positions
23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Compaq dx7500

Table of Contents