TomTom RIDER 2nd Edition User Manual page 12

Handlebar adaptor
•
•
•
12
•
•
•
2. Wrap the piece of rubber provided around the handlebars to make the
handlebars thick enough for the Handlebar Mount. Cut the piece of rubber
to adjust the thickness.
Note: The piece of rubber helps prevent vibration and stops the Handlebar
Mount from slipping while you are driving.
3. Place the Handlebar Mount around the handlebars and over the piece of
rubber.
4. Screw the Handlebar mount together tightly using the Allen key provided.
5. Screw the Holder to the Handlebar Mount using four of the small screws
included with the mounting kit.
If your TomTom RIDER is not in a comfortable position, unscrew the
Handlebar Mount slightly and adjust the angle of the mount and the holder.
Then screw the Handlebar Mount together tightly again.
You can now place your TomTom RIDER in the Holder. See this section:
Placing your TomTom RIDER in the Holder on page 15.
The Handlebar Adaptor is secured by bolts next to the grip, as shown.