HP dx2400 - Microtower PC Hardware Reference Manual page 44

3. Connect the power cable (1) and data cable (2) to the back of the hard drive.
Figure 2-32
CAUTION:
sharp bend can break the internal wires.
4. Place the hard disk drive cage into the chassis (1), then slide it down toward the bottom of the
chassis until it locks into place (2).
Figure 2-33
38 Chapter 2 Hardware Upgrades
Connecting the Hard Drive Cables
Never crease or bend a SATA data cable tighter than a 30 mm (1.18 in) radius. A
Installing the Hard Drive Cage
ENWW