Administration > Factory Defaults; Administration > Upgrade Firmware; Administration > Config Management; Status > Router - Linksys WRT54G - Wireless-G Broadband Router Wireless User Manual

Chapter3
and click Traceroute. The Traceroute Test screen will show
if the test was successful. To stop the test, click Stop. Click
Clear Log to clear the screen. Click Close to return to the
Diagnostics screen.
The Traceroute Test
Administration > Factory Defaults
The Administration > Factory Defaults screen allows you
to restore the Router's configuration to its factory default
settings.
Factory Defaults
Restore Factory Defaults
to the default values, select Yes, and then click Save
Settngs. Any settings you have saved will be lost when
the default settings are restored.
Administration > Factory Defaults
Administration > Upgrade Firmware
The Administration > Upgrade Firmware screen allows you
to upgrade the Router's firmware. Do not upgrade the
firmware unless you are experiencing problems with the
Router or the new firmware has a feature you want to use.
Wreless-G Broadband Router
To reset the Router's settings
Advanced Configuration
Administration > Upgrade Firmware
Before upgrading the firmware, download the Router's
firmware upgrade file from the Linksys website, www.
linksys.com. Then extract the file.
Upgrade Firmware
Please select a fle to upgrade
the extracted firmware upgrade file. Then click Upgrade
and follow the on-screen instructions.
Administration > Config Management
This screen is used to back up or restore the Router's
configuration file.
Administration > Config Management
Backup Configuration
To back up the Router's configuration file, click Backup.
Then follow the on-screen instructions.
Restore Configuration
Please select a fle to restore
the configuration file. Then click Restore.
Status > Router
The Status > Router screen displays the Router's current
status.
Click Browse and select
Click Browse and select
9