Wireless > Wireless Mac Filter - Linksys WRT54G - Wireless-G Broadband Router Wireless User Manual

Chapter3
Security Mode > RADIUS
IMPORTANT:
If you are using WEP encryption,
always remember that each device in your
wireless network MUST use the same WEP
encryption method and encryption key, or else
your wireless network will not function properly.
RADIUS Server Address
Enter the IP Address of the
RADIUS server.
RADIUS Port Enter the port number of the RADIUS
server. The default value is 82.
Shared Key
Enter the key shared between the Router
and the server.
Default Transmt Key Select a Default Transmit Key
(choose which Key to use). The default is .
WEP Encrypton Select a level of WEP encryption,
64 bts 0 hex dgts or 28 bts 26 hex dgts. The
default is 64 bts 0 hex dgts.
Passphrase Enter a Passphrase to automatically generate
WEP keys. Then click Generate.
Key -4
If you did not enter a Passphrase, enter the WEP
key(s) manually.
WEP
WEP is a basic encryption method, which is not as secure
as WPA.
Wreless-G Broadband Router
Advanced Configuration
Security Mode > WEP
Default Transmt Key
Select a Default Transmit Key
(choose which Key to use). The default is .
WEP Encrypton Select a level of WEP encryption, 64 bts
0 hex dgts or 28 bts 26 hex dgts. The default is
64 bts 0 hex dgts.
Passphrase
Enter a Passphrase to automatically generate
WEP keys. Then click Generate.
Key -4 If you did not enter a Passphrase, enter the WEP
key(s) manually.
Click Save Settngs to apply your changes, or click Cancel
Changes to cancel your changes.
Wireless > Wireless MAC Filter
Wireless access can be filtered by using the MAC addresses of
the wireless devices transmitting within your network's radius.
Wireless > Wireless MAC Filter
Wireless MAC Filter
Wreless MAC Flter
To filter wireless users by MAC Address,
either permitting or blocking access, click Enable. If you do
not wish to filter users by MAC Address, keep the default
setting, Dsable.
Prevent
Select this to block wireless access by MAC
Address. This button is selected by default.