Type 3 Battery Holder - Compaq dx2390 - Microtower PC Service & Reference Manual

Business pc
Hide thumbs Also See for dx2390 - Microtower PC:
Table of Contents

Advertisement

4.
Plug in the computer and turn on power to the computer.
5.
Reset the date and time and any special system setups using Computer Setup. Refer to
Setup (F10) Utility on page

Type 3 Battery Holder

1.
Pull back on the clip (1) that holds the battery in place, then remove the battery (2).
2.
Insert the new battery and position the clip back in place.
3.
Replace the computer access panel.
4.
Plug in the computer and turn on power to the computer.
5.
Reset the date and time and any special system setups using Computer Setup. Refer to
Setup (F10) Utility on page
66
Chapter 6 Removal and Replacement Procedures Microtower (MT) Chassis
3.
3.
Computer
Computer

Advertisement

Table of Contents
loading

Table of Contents