Oki ML3410 Handbook page 48

Set-Up
ML3410 ( 96-02-07 )
Page Length
Graphics
Max. Receive Buffer
Paper Out Override
Print Registration
11 ², 11 2/3²,12²,14²,
17²,3², 3.5²,4², 5.5², 6²
,7²,8², 8.5²
Bi-directional ,
Unidirectional
1 Line, 4K, 16K , 28K
No, Yes
0.25 mm Right, 0.20
mm Right, 0.15 mm
Right, 0.10 mm Right,
0.05 mm Right, 0.00
mm , 0.05 mm Left,
0.10 mm Left, 0.15
mm Left, 0.20 mm
Left, 0.25 mm Left
Bi-directional prints
from left to right, then
right to left; this is
faster, but may cause
registration
prob-lems.
Uni-directional
printing (left to right
only) is more precise,
but slower.
Specifies amount of
the printers buffer
used to store data.
A sensor stops
printing about 1 inch
from the bot-tom of a
single page.
Changing this setting
to Yes lets you print
closer to the bottom
edge of the paper.
This lets you adjust
the vertical
registration in
graphics. The best
setting may vary from
one soft-ware
package to another.