Product View And Features; Wash Cycle Selections; Dishwasher Features - Frigidaire FFBD2406NB Use & Care Manual

Complete owner's guide (english)
Hide thumbs Also See for FFBD2406NB:
Table of Contents

Advertisement

DISHWASHER FEATURES

Your dishwasher cleans by spraying a mixture of hot water and detergent through the spray arms against soiled surfaces.
First, the dishwasher fills with water covering the filter area. Water is then pumped through the spray arms. Soil particles
go through and across the filters, and down the drain as the water is pumped out. This series of steps are repeated as
needed. The number of water fills will vary with the cycle being used.
Cup Shelves
(on some models)
Middle Spray Arm
Lower Spray Arm
Overfill Protector
Detergent Dispenser
Rinse Aid
Getting Started
1. Load dishwasher (See Preparing and Loading Dishes).
2. Add detergent (See Dishwasher Dispenser &
Detergents).
3. Add rinse aid, if needed (See Rinse Aid).
4. Close door to latch.
5. Select desired CYCLE (See Cycle Chart). The indicator
light above the pad will glow when selected.
6. Select desired OPTIONS (See Energy Options). The
indicator light above the pad will glow when selected.
7. Run hot water faucet nearest dishwasher until water
is hot. Turn water off.
8. To start, press START/CANCEL pad.
NOTE
*Not all cycles and options available on all models.
4
Nozzle
Vent
Top Rack
Appearance may vary from your model.
NOTE
The dishwasher is programmed to remember your last
cycle so you do not have to reset each time. To start the
dishwasher using the same cycle and options selected on
the previous wash, just press the START/CANCEL pad.

Wash Cycle Selections

Cycle times are approximate and will vary with options
selected. Hot water is necessary to activate dishwasher
detergent and melt fatty food soils. An automatic sensor will
check the incoming water temperature and, if it is not hot
enough, the cycle will be lengthend for automatic water
heating in the main wash and final rinse of all cycles. This
happens even when HI-TEMP WASH option has not been
selected. When HI-TEMP WASH is selected, an even higher
temperature will be reached to handle heavier soil loads.
Tub
Serial Label
(located on
Bottom
Silverware
Glass Trap
Heating Element

Advertisement

Table of Contents
loading

Table of Contents