Advertisement
DIMENSIONAL DRAWINGS
DIMENSIONAL DRAWING
FR153z
INDICATES MOUNTING POINT, 3/8-16 THREADED HOLE (RIVNUT).
INDICATES MOUNTING POINT, 3/8-16 THREADED HOLE (NUT PLATE).
19.75
25.25
GRILL PARTIALLY SHOWN
FRONT
1.96
L C
8.00
POLE MOUNT SOCKET
BOTTOM
510949 (A)
exp 01/19/00 dpm
PHYSICAL
Configuration
3-way, full range
Powering
Passive (LF/MF/HF crossover)
LF Subsystem
15-in woofer, vented
MF Subsystem
6.5-in cone, sealed subenclosure
HF Subsystem
1-in exit/2-in voice coil compres-
sion driver on Wave Guide Plate™
Cabinet Type (shape)
Trapezoidal
Enclosure Materials
Baltic birch plywood
Finish
Black polyurethane
Connectors
2 x Neutrik NL4 Speakon
Suspension Hardware
(3) 3/8-16 threaded mounting
points (2 top, 1 back), pole mount
cup
Grille
Powder coated perforated steel
Dimensions
Inches
Height
25.25
Width (front)
19.75
Width (rear)
13.08
Depth
19.75
Trapezoid Angle
10 Per Side
Weights
Pounds Kilograms
Net Weight
75
Shipping Weight
79
Companion Systems
Sub Bass
FR250z
Acoustic Performance Partnership
One Main Street, Whitinsville MA, 01588 USA • Phone 508/234-6158 • Toll Free 800/992-5013 • Fax 508/234-8251 • Web http://www.eaw.com • email info@eaw.com
HANDLE
12.50
C
L
8.25
SIDES
INPUT
6.63
(13.20)
C L
4.19
3.63
BACK
8.00
13.25
20
TOP
Millimeters
641
502
332
502
34.1
35.9
Eastern Acoustic Works
SPECIFICATIONS FR153z
A & E SPECIFICATIONS
The three-way full range loudspeaker systems shall incorpo-
rate a 15-in LF transducer, a 6.5-in cone MF transducer and
1-in exit/2-in voice coil compression driver HF transducer.
The LF driver shall be mounted in a vented enclosure tuned
for optimum low frequency response. The MF driver shall be
mounted in a sealed subenclosure. The HF driver shall be
loaded on an axis-symmetrical wave guide plate with a nomi-
nal coverage pattern of 100 (conical). An internal passive
filter network shall provide fourth order acoustical crossover
and system equalization.
System frequency response shall vary no more than 3 dB
from 60 Hz to 18 kHz measured on axis. The loudspeaker
shall produce a Sound Pressure Level (SPL) of 97 dB SPL on
axis at 1 meter with a power input of 1 Watt, and shall be
capable of producing a peak output of 130 SPL on axis at 1
19.75
meter. The loudspeaker shall handle 500 Watts of amplifier
power (AES Standard) and shall have a nominal impedance
of 8 Ohms.
The loudspeaker enclosure shall be trapezoidal in shape. It
shall be constructed of 1/2-in thickness void-free cross-grain-
laminated Baltic birch plywood and shall be finished in black
polyurethane. Recessed handels and rubber footpads shall
be provided. Input connectors shall be dual Neutrik NL4 Spea-
kon. Three 3/8"-16 threaded mounting points (2 top, 1 back)
shall be provided as well as a recessed cup to accept a
standmount pole. The front of the loudspeaker shall be cov-
ered with a powder coated perforated steel grille.
The three-way full range loudspeaker shall be the EAW model
FR153z.
INPUT PLATE
FR153z
WHITINSVILLE, MA USA
S/N
PIN 1--...--
PIN 1+...+
FR153z
Advertisement
