Nikon 25492 Reference Manual page 110

4
Select Choose start/end point.
Highlight Choose start/end point and press
J.
The dialog shown at right will be displayed;
choose whether the current frame will be
the starting or end point of the copy and
press J.
5
Delete frames.
If the desired frame is not currently
displayed, press 4 or 2 to advance or
rewind (to skip to 10 s ahead or back, rotate
the command dial). To switch the current
selection from start point (w) to end point (x)
or vice versa, press A (L).
Once you have selected the start point and/
y
or end point, press 1. All frames before the
selected start point and after the selected
end point will be removed from the copy.
6
Save the copy.
Highlight one of the following and press J:
• Save as new file: Save the copy to a new file.
• Overwrite existing file: Replace the original
movie file with the edited copy.
• Cancel: Return to Step 5.
• Preview: Preview the copy.
Except in the photo information "image only" page (0 98), edited copies are
indicated by a f icon in full-frame playback.
94
A (L) button