Replacing A Pci Adapter Card - Lenovo 410554U Hardware Maintenance Manual

7. To install the memory fan, engage the rear of the duct with the retainer on the system board and then
pivot the duct downwards until the duct snaps into position. Reconnect the memory fan cable to the
system board.
8. Go to "Completing the FRU replacement" on page 106.
Note: Your system memory speed is determined by a number of factors, including the microprocessor
model and the type, speed, size (capacity), and number of DIMMs installed.

Replacing a PCI adapter card

Attention
Do not open your computer or attempt any repair before reading and understanding the "Important safety information"
in the ThinkStation Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkStation
Safety and Warranty Guide, go to:
http://www.lenovo.com/support.
This section provides information about how to replace a PCI adapter card.
To replace a PCI adapter card, do the following:
1. Remove the computer cover. See "Removing the cover" on page 76.
2. Unlatch and open the card retainer .
116
ThinkStation Hardware Maintenance Manual